Power Automate Failed Flow test

(1) Share

Report

Posted on by CU26060713-1

Hi any tips on how to ensure my flow works properly: when setting the parameters i had to switch the tables to find what i needed for the email components.

I have the same question (0)

All responses (4)

Answers (0)

Suggested answer

Michael E. Gernaey Super User 2025 Season 2 on at

Like (0)

Report

Hi @CU26060713-1

What is that Dynamic property you are putting in the To?

Its Blank, so its not the right value. Are you supposed to Email yourself, or the vehicle owner?

Either way, that value is blank so either your data is not correct hence its blank, or you are supposed to email yourself. in which case use Gmail or Hotmail(Outlook) to send yourself the email, don't try to use an Office 365 Account to send an email in the Power Up program as its not going to work, UNLESS you are using your own Tenant and Environment to do the work.

Power Up doesn't give you emails to send from so you have to use Gmail or Outlook, or your own tenant.

If these suggestions help resolve your issue, Please consider Marking the answer as such and also maybe a like.

Thank you!
Sincerely, Michael Gernaey

Was this reply helpful? Yes No
Suggested answer

w.p Super User 2025 Season 2 on at

Like (0)

Report

@CU26060713-1

For tips on ensuring your flow works correctly, I’d recommend rewatching the flow modules and carefully reading any error messages. In this case, the error indicates that the send to email address is empty. Please try filling in the column with your personal email for this challenge.

Was this reply helpful? Yes No
CU26060713-1 on at

Like (0)

Report

@Michael E. Gernaey Hi im not sure where the dynamic property is and the email is supposed to be sent to the emails within the vehicle owner email column in the vehicles table but the table for the flow is supposed to be the parking requests. so i was switching tables in the trigger to add different elements.

Was this reply helpful? Yes No
CU26060713-1 on at

Like (0)

Report

@w.p @Michael E. Gernaey thank you both for your advice i will go over the module but to see what other errors could arise i used a personal email when editing my flow and the test was passed so i will look to fix that as well. tthank you very much again

Was this reply helpful? Yes No